以下内容摘自“干货！咖啡机部件英文名称及说明 (sohu.com)”The on/off switch connects the coffee machine to the power supply. It activates the pump and heat mechanisms. 通/断开关连接咖啡机的电源。它用来激活泵和热机制。The extraction controls activates the flow of hot water through the group heads, flowing into the cup. 萃取开关激活热水水流，通过冲泡组头，流入杯子。The filter basket is a perforated, stainless steel container designed to hold measured portions of ground coffee. There are mainly two different sizes, a single and a double. 粉碗是一种多孔的不锈钢容器，用来放入测量研磨咖啡粉的部分。主要有两种不同的尺寸，一个单份大小的和一个双份大小。The word group describes the assembled group handle and the group head. Coffee machine are normally describes by the amount of groups they posses. Small machine have one group and can go as large as five groups.冲泡组描述的是手柄和冲泡头的组合。咖啡机通常由他们拥有的咖啡冲泡头的个数来区分：小至只有一个制作头的小型机器，大至五组冲泡头的大型机器。The group handle hold the filter basket of ground coffee during the extractions process. It is attached to the machine with the protruding lugs on its side. 在萃取过程中要将咖啡粉放置于手柄上的粉碗里。手柄的凸缘方便与机器连接。The steam control activates the flow of steam from the top of the boiler out through the nozzle of the steam wand. 蒸汽开关将从锅炉顶部出来的蒸汽激活，使其流通过蒸汽棒的喷嘴。The steam wand consists of a moveable arm with a nozzle at the end. It dispenses steam which foams and heats up milk. 蒸汽棒由可动臂与尾部的喷嘴组成。它分注蒸汽，使牛奶起泡和加热。The steam nozzle is at the end of the steam wand. It usually has 1~5 holes that distributes the steam in different directions. 蒸汽喷嘴是结束时的蒸汽棒。它通常有一至五个孔，蒸汽分布在不同的方向。The hot water control activates the flow of water from the boiler to the hot water arm. 热水开关激活从锅炉到达热水臂的水流。The hot water arm dispenses hot water direct from the boiler. 热水出口流出直接从锅炉出来的热水。The cup warmer is a tray on top of the coffee machine for cups to be stored and warmed ready for use 暖杯盘位于咖啡机的顶部，可以使用来存储和温热杯子以备使用。The drip tray collects spills and drips and directs them through a hose into a drainage area, sometimes a bucket, or straight into a drain. 接水盘收集溢出和滴落的水，并引导他们通过软管进入排水区域，可以连接桶或排水管。
